Leaks turning up in several places
Copper or PEX, once the original supply is worn out. We sequence it so the water's off for hours and you can stay home.
Thousand Oaks · Repiping
5.0 on Google (20 reviews) CSLB Lic. #339618 Family shop since 1977
Copper & PEX repiping in Thousand Oaks, ten minutes from the shop in Westlake Village. A repipe replaces every water line in the house. It's for pipe that's failing, and we'll tell you if yours is.
Dan picks up when he can and calls back the same day. You get the price before we start. Monday to Friday, 9am – 5pm.
“Dan is smart and good at figuring things out. He will stay on it until it's right and he knows his stuff.”
“Dan was quick to respond and explained what needed to be done. The price was fair and we will call him if we have other plumbing needs.”
“Dan and his crew are absolutely the best! Professional, communicative and fair prices. Couldn't ask for anything more!”
Around here
Repipes in Thousand Oaks come from the older east-side tracts, where sixties and seventies copper has pinholed more than once. The newer Lang Ranch houses almost never need one, and we'll tell you so. New lines run overhead in copper or PEX, with the water off a few hours at a time. The permit goes through City of Thousand Oaks Building and Safety.
Neighborhoods: Lang Ranch, Sunset Hills, North Ranch, the Westlake side of the boulevard, the older tracts off Erbes Road, central Thousand Oaks, Newbury Park.
Copper or PEX, once the original supply is worn out. We sequence it so the water's off for hours and you can stay home.
We find it first. One bad spot and the start of a pattern are very different jobs.
The job
In older houses, galvanized steel rusts shut from the inside, and the water runs brown after sitting overnight. More common here is sixties and seventies copper that's started to pinhole. One pinhole is a repair. Three in two years is a pattern.
Copper is what most of these houses have, and we join it with press fittings, which are faster and cleaner than solder. PEX is flexible tubing from a manifold, one line per fixture. It needs fewer wall openings and doesn't pinhole. Both are permitted and inspected.
A typical house takes two to four days. We work in stages, so the water's back on every evening. Drywall openings are small, and each one is listed on the bid. You stay in the house.
Call if
Galvanized pipe rusting shut from the inside.
The same rust, narrowing the pipe.
The copper is at the end of its life.
Copper dissolving, usually from age and high pressure.
A permitted, inspected repipe is a selling point.
Tell us what it’s doing and we can usually narrow it down on the phone.
From the blog
Four steps
Dan picks up when he can and calls back the same day. Tell him what it’s doing.
We come out, find the cause and show you, with the old part in hand when there is one.
Before anything starts. Repairs are time plus parts. Bigger jobs get a written bid.
Small repairs usually get done the same visit. Bigger jobs get a start date we keep. Permitted where needed, and the house left clean.
Common questions
Often the same day. The east side is ten minutes from the shop, and Newbury Park is the far end. Call and Dan will give you a time.
It can. The city protects oaks and their root zones, so a trench can't always take the shortest route. We locate the line from the surface and plan around the trees first.
Both work. Copper is what buyers expect. PEX goes in faster with fewer openings and doesn't pinhole. In a slab house, either one runs overhead. We can bid both.
A few hours at a time, and it's back on every evening.
No. It's noisy for a few days and some walls get small openings.
“My 12 year old water heater started leaking yesterday so I texted him, and he called me right away to help me turn off the water and gas. And he was here next day with a new water heater installed.”
“Dan's plumbing were fantastic, they installed the AWTOS water sensor our Insurance company sent us, fixed some clogged exterior drains that were blocked, and installed a new trash disposal unit...all for a very competitive price. Thanks guys, we're glad we called you!”
“Dan's Plumbing did excellent job for us replacing our broken water pressure regulator. Quick response, good price, great quality of work. Will hire them again.”
Nearby
Most problems get sorted out on a short call. Ten minutes from the shop. Leaking right now? Shut off the main, then call.
Or send the details and Dan will call you back. Monday to Friday, 9am – 5pm.
Find us
(805) 330-3111 · Monday to Friday, 9am – 5pm
Serving Westlake Village, Thousand Oaks, Agoura Hills, Oak Park and Lake Sherwood. Zip codes 91361, 91362, 91360, 91320, 91301, 91377, 91302, 90265.