Water heaters · Leaks

Water heater leaking. Do this first.

Two valves stop most of the damage. Then look at where the water is coming from. That tells you if it’s a repair or a new heater.

Dan and Dave of Dan's Plumbing in front of their work truck

Dan (left) and Dave. Text a photo of the leak and the label. Dan will tell you what it is and what it costs.

  1. Shut off the cold water to the heater

    It’s the valve on the pipe going into the top of the tank. Turn a round handle clockwise until it stops. Turn a lever so it sits across the pipe.

  2. Turn off the heat

    Gas: turn the knob on the gas valve to OFF. Electric: switch off the heater’s breaker. If you smell gas, leave the house and call the gas company from outside.

  3. Catch the water

    A bucket and towels for now. Don’t try to move the heater. A full tank weighs hundreds of pounds.

  4. Find where it’s coming from

    Then text Dan a photo of that spot and the label on the side of the heater.

Where the water is coming from

What the leak usually means

01

Under the tank, from the tank itself

The tank has rusted through inside. That can’t be fixed. It’s time for a new heater.

What a new one costs →
02

The drain valve near the bottom

A drain valve that drips can usually be replaced. A repair.

What we fix →
03

The pipe running down the side

That’s the relief valve line. Around here it’s usually a pressure regulator with no expansion tank, so the heated water has nowhere to go. An expansion tank fixes it, and it’s required with a regulator. Sometimes the valve itself is worn out.

04

The pipes on top

A loose or worn water connector or fitting. Usually a repair, unless the top of the tank is rusted.

05

A few drops under a new gas heater

Condensation is normal for a little while after a new tank fills with cold water. It stops once the water warms up.

06

A tankless on the wall

Usually a valve, a fitting or the relief valve. Sometimes it’s the heat exchanger. A look tells which.

Tankless water heaters →

If the tank itself is leaking, a standard 50-gallon gas swap is $2,950 installed, and we can often do it the same day.

From a customer

A leak one day, a new heater the next

Kevin in Thousand Oaks texted Dan when his 12-year-old heater started leaking. Dan called him right back and walked him through shutting off the water and gas. The new heater went in the next day, with the drain pan and expansion tank his home inspector had asked for.

From the jobsite

Recent water heater jobs

All job stories →

Common questions

Leaking water heater questions

Is a leaking water heater an emergency?

A drip from a fitting can wait a day. Water from the tank itself only gets worse, and a 50-gallon tank can end up on the floor. Shut off the cold water and the heat, then call.

Can I still use water if my water heater is leaking?

Yes. With the valve on the heater’s cold water pipe shut, the rest of the house still has cold water. You won’t have hot water until it’s fixed.

How long will a leaking water heater last?

If the water is coming from the tank, plan on replacing it this week. A leak from a valve or a connector can usually be fixed and the heater keeps going.

Do I call a plumber or an HVAC company for a water heater?

A plumber. Water heaters are plumbing work. Dan’s Plumbing holds a C-36 plumbing license, CSLB Lic. #339618.

What does a new water heater cost if mine is done?

A standard 50-gallon gas tank is $2,950 installed, with straps, an expansion tank, a drain pan, new connectors and haul-away. Sales tax on the parts is extra.

How fast can you put in a new water heater?

Book by noon and we can often install it the same day. Otherwise it’s usually the next weekday. If it’s leaking right now, turn off the cold water valve on top of the heater (and the gas valve if it’s gas), then call or text Dan.

Water heater help

More about water heaters

Dan standing in front of his white work truck, smiling

Leaking right now?

Shut off the cold water and the gas or power, then call or text Dan a photo.

Or send the details and Dan will call you back. Monday to Friday, 9am – 5pm.

Find us

Dan's Plumbing

2352 Hillsbury Rd
Westlake Village, CA 91361

(805) 330-3111 · Monday to Friday, 9am – 5pm

Serving Westlake Village, Thousand Oaks, Agoura Hills, Oak Park and Lake Sherwood. Zip codes 91361, 91362, 91360, 91320, 91301, 91377, 91302, 90265.

Dan (left) and Dave. Family run since 1977. One of them does the work.