Navien · Error code E001 · Checked November 2026
Navien error code E001: heat exchanger overheat
Navien lists E001 only for its combi-boilers and boilers, not its tankless water heaters. It isn’t an ignition code.
Smell gas? Don’t touch any switch or try to reset anything. Leave the house, then call 911 or your gas company from outside. In Southern California that’s SoCalGas, 1-800-427-2200.
From Dan and Dave at Dan's Plumbing, a family plumbing shop in Westlake Village, California. Everything below comes from Navien’s own documents, cited line by line.
What it means
What Navien says code E001 means
“Heat Exchanger Overheat”— User’s Information Manual - NCB-H Condensing Combi-Boilers (NCB-190/060H ... NCB-250/150H), page 25
Navien lists E001 as “Heat Exchanger Overheat,” and only for its combi-boilers and boilers: the NCB-H, NCB700, NHB-H and NFB-H. It isn’t in any of the Navien tankless water heater manuals we read.
Some websites say E001 is an ignition failure on a Navien tankless. Navien’s own manuals use E003 for that. A combi-boiler both heats the house and makes the hot water, so a code on one can affect both.
Model differences. Boiler/combi-boiler code only. Not in any NPE, NPN or NHW water heater code table. Some websites list E001 as 'ignition failure' on NPE water heaters; Navien’s NPE manuals use E003 for ignition failure and do not list E001.
What to do
Safe checks first. Then call a pro.
Safe checks you can do
Reset the boiler from the front panel (Back button). (NCB-H user’s manual, pp. 13, 25)
Reset the boiler from the front panel (NCB700). (NCB700 installation manual, p. 136)
To clear the code:
- NCB-H combi-boiler: press the Back button on the front panel to reset. (NCB-H user’s manual, pp. 13, 24)
- NCB700 combi-boiler: press the Back button on the front panel to reset. (NCB700 installation manual, p. 116)
- NHB-H boiler: press the Back button on the front panel to reset. (NHB-H user’s manual, p. 14)
What a technician checks, and why
- Check for proper heating-system flow.Heating-system piping, pumps and flow checks are technician work. Listed for NHB-H/NFB-H boilers. (NHB-H user’s manual, p. 24)
Please don’t
- Don’t open the burner, the gas valve or the sealed combustion chamber.
- Don’t keep resetting a code that keeps coming back. A code that returns means the cause is still there.
- Don’t bypass or unplug a safety sensor to get hot water back.
- Don’t cover, tape or move the vent or the air intake.
Heater getting old, or the same code keeps coming back? Repair or replace? Three taps and Dan’s answer → Or see what a water heater repair usually involves.
Where this comes from
Sources
Taken from Navien’s own documents, checked November 13, 2026. Page numbers are the printed page. Where models differ, we say which model each part applies to.
- User’s Information Manual - NCB-H Condensing Combi-Boilers (NCB-190/060H ... NCB-250/150H) Navien, Inc. · Version 1.0 (April, 2024) · Models: NCB-190/060H, NCB-190/080H, NCB-240/110H, NCB-240/130H, NCB-250/150H
- Installation & Operation Manual - NCB700 Condensing Combi-Boilers Navien, Inc. · Version 1.0 (July, 2026) · Models: NCB700-190/060, NCB700-190/080, NCB700-240/110, NCB700-240/130, NCB700-250/150
- User’s Information Manual - NHB-H Condensing Boilers (NHB-055H/080H/110H/150H) Navien, Inc. · Version 1.0 (April, 2024) · Models: NHB-055H, NHB-080H, NHB-110H, NHB-150H
Water heater help
More about water heaters
Code won’t clear?
If you’re within about 30 miles of Westlake Village, call or text Dan a photo of the display and the label. He’ll tell you what it is.
Or send the details and Dan will call you back. Monday to Friday, 9am – 5pm.

